BMW Motorcycle Tail Lights
No results found for "Tail Light, Tail Lamp, Stop Lamp, Park Lamp, Backup Lamp". Here are some helpful search tips:
- Search by a part name. Example: water pump.
- Be less specific. Example: brake instead of ceramic brake.
- Remove information such as make, year or model.
- Can't find the part you are looking for? Contact us and we'll find it for you!
Tail Lights at a Glance
A working tail light keeps you visible to traffic behind you, especially when you brake. Genuine BMW Motorrad tail light assemblies are built for your bike's bodywork, wiring, and lighting electronics. Confirm fitment by VIN, since designs vary by model, year, and market.
Whether you commute in rush-hour traffic or ride a GS into the evening on a long adventure day, the tail light is what tells drivers you're there and when you're slowing down. A cracked lens lets in water, a failing LED array dims your brake signal, and a tip-over can break a housing in seconds. Replacing it with the correct genuine assembly restores that visibility without fitment headaches.
Rear Lighting Parts in This Category
- Complete LED tail light assemblies for current BMW models
- Bulb-type tail light units for earlier models
- Lenses, housings, and mounting components where available separately
- Tail light units that integrate rear turn signal functions on some newer models
The Case for a Genuine BMW Tail Light
Modern BMW motorcycles monitor their lighting electronically. An aftermarket tail light can draw a different current than the original, which may trigger a lamp fault warning or cause the system to behave unexpectedly. Genuine assemblies are designed to work with your bike's electronics, seal properly against rain and pressure washing, and match the bodywork lines exactly.
Choosing Between LED and Bulb-Type Units
Most current BMW models use sealed LED tail lights. When an LED unit fails, the usual fix is a complete assembly rather than an individual LED. Earlier bulb-type tail lights can often be repaired by replacing taillight bulbs alone, so check the bulb first before ordering a full unit. If the lens is cracked or moisture is collecting inside, replace the assembly to prevent corrosion at the contacts.
Fitment Notes for Tail Light Assemblies
Tail lights can differ between U.S. and European versions of the same model, and some designs changed mid-generation. A VIN lookup pulls the correct diagram for your bike's build. Check whether your model uses separate rear turn signals or a combined unit, and inspect connectors and the rear cable harness for damage if the light failed after a drop. Browse our full lighting range for related parts.
Tail Light Takeaways
- Genuine tail lights work with BMW's lighting electronics and seal properly.
- Most failed LED units are replaced as complete assemblies.
- Bulb-type units may only need a new bulb.
- Fitment varies by model, year, and market, so search by VIN.
Tail Light FAQs
Can I replace just the LED in my BMW tail light?
Typically no. Most BMW LED tail lights are sealed units, so the whole assembly is replaced.
Why does my dash show a lamp fault after installing an aftermarket tail light?
The bike's electronics may read a different current draw as a failure. A genuine assembly avoids that mismatch.
Will a tail light from a European model fit my U.S. bike?
Not always. Market versions can differ, so confirm with your VIN before ordering.